G4X Link ECU

G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  This ECU fits inside the factory OEM enclosure.
 
Includes Onboard 7 Bar MAP Sensor (Can Use OE or Aftermarket OE as well)
**Some Evo8 have a 3 connector ECU, these vehicles use Evo9 fitment ECU.**
EVO9 or 3 Connector Evo8 Owners - CONTACT FOR PURCHASE - Pricing is the same however. 
 
Main ECU Options:
1. Level 1 - PNP G4X Ecu Only $1775.00 - no additional Kozmic harnesses, OK for normal plug and play operation without wideband kit.
2. Level 2 - G4X + Kozmic PNP Harnesses $2864.95 - Includes PNP harness for Direct Spark (Adds trigger wiring for denso coils, others CONTACT), CAN Communications Circuit, Link Wideband Controller Wiring, Clutch Switch and more. Select Additional sensors to be wired in if desired. Add a Can Keypad for Boost Select Switches, Rolling Anti-Lag and more!
3. Level 3 - G4X + Kozmic Drive By Wire Package $3804.95 - Includes base PNP harness from Package 2, and adds in the complete PNP Drive By Wire harness and components - Including EvoSpec Pedal Mounting Kit, EvoX OE Throttle Body (Used), Drive By Wire Accel Pedal (Used), all hardware and gaskets, etc. Take idle control to a new level! Add a CAN Keypad for CRUISE CONTROL, Boost Select Switches, Rolling Anti-Lag and more!
 
Additional Sensors (Requires Level 1 or 2 Purchase):
AEM Stainless Steel Pressure Sensors $230/Each - Typically use 150psi sensors for Oil and Fuel Pressure on all cars. Can optionally add 150psi, 500psi, 2000psi sensors for monitoring anything desired. Includes additional time and materials to wire into Kozmic main lead harness.
*Level 2 wiring limited to 2 sensors, can be upgraded to additional 4 however for additional cost*
**Level 3 limited to 3 sensors**
AEM Exhaust Back Pressure Stainless Steel Kit $330 - Complete exhaust back pressure kit for monitoring and tuning. Includes additional time and materials to wire into Kozmic main lead harness. ***Counts as a pressure sensor above if limited on open inputs***
GM Ethanol Content Sensor $170 - GM Ethanol content sensor, with mounting bracket for a clean firewall mounting behind the intake manifold. This sensor uses 3/8" quick disconnects, the fittings are avialbe in a variety of options depending on how your return line is setup, conact us for the fittings if needed. Includes additional time and materials to wire into Kozmic main lead harness.
 
Other Misc Avialable Options:  THERE ARE TONS OUT THERE, if you have an idea let us know - CONTACT TO ADD TO PURCHASE - there may be limitations to wiring, etc.
2nd Fuel Pump Trigger Output - Adds a DTM 2 pin connector kit on the ECU harness to easily wire as the trigger wire on your relay to control a 2nd and/or 3rd fuel pump, skip the unrelaible hobb switches! $45
CAN Splitter - Plug and Play CAN Netork Splitter to use your favorite Data Display, CAN Keypad Etc. $48.50
4 Button CAN Keypad (See pics) - Can be used for ALL KINDS OF THINGS, Boost Select Switches, Intercooler Sprayers, etc Can Also be used for Cruise Control on Drive By Wire Cars (Cruise requires 4 buttons to operate). Requires the CAN Splitter above for installation. Key Pad and PNP Wiring Harness to CAN network at ECU - $385
8 Button CAN Keypad (See pics) - Same as the 4 button, but you get 8 instead! (Cruise requires 4 buttons to operate). Requires the CAN Splitter above for installation. Key Pad and PNP Wiring Harness to CAN network at ECU - $395
Kozmic CAN KeyPad Ashtray Mount - a Plug and Play mount for your CAN key pad that replaces the OEM ashtray that you aren't using anyway! Proper position and placement to easily press the buttons with your hand left on the shifter. Designed and Manufactured IN HOUSE - $120