Kozmic MAP Sensor Kit

Ready to turn up the boost?
Tired of that one popular 4 bar map sensor that never lives long?
 
We are finally bringing to the public the same kit we have developed and use here at Kozmic Motorsports any time a sensor upgrade is required, using only the best components and sensors! 
 
Kozmic Plug and Play Motorsports Grade MAP Sensor Kit
Fits Evo8/9/X and 4B11T Ralliarts!
Your choice of MAP sensor capacity - Most Common = 5 Bar MAP Sensor
Billet Intake Manifold Adapter
NEW Upgraded O-Ring (Some aftermarket manifolds that have this hole undersized may require the use of the OEM O-Ring).
100% Plug and Play TUCKED Jumper Harness - Mil Spec Tefzel Wire - MADE HERE IN TEXAS
 
When selecting the sensor for the kit, remember the following:
1 BAR = 14.5psi
You loose 1 BAR to atmosphere at sea level. This means a 2 BAR MAP sensor will read up to 14.5 of boost pressure at sea level. 
Anything smaller than a 3.5 BAR sensor is a DOWNGRADE on EvoX/Ralliart
You want to run the LOWEST rated sensor you can to have the best resolution when tuning.
Typically take your PEAK desired boost level, add a few PSI for boost cut/overboost pressure readings (4-8psi) and pick your sensor. 
Always consult your tuner before assuming/guessing what sensor to buy! 
 
Depending on what sensor you select and inventory at time of purchase, sensor may not be the same or appear the same as pictured.