EvoX Haltech Ecu Elite 1500 Nexus R3

Kozmic Motorsports is the WORLD LEADER with Evolution 10 and Ralliart Tuning, Performance and Knowledge. Since their release in 2008 Kozmic has been at the leading front of development and testing with the 4B11 powered platform. With well over a DECADE of experience in these platforms, you can rest assured we have the experience to back our sales and recommendations.

We are proud to introduce the MOST TURN KEY AFTERMARKET ECU SOLUTION ON THE MARKET FOR THE EVOX!

What does this mean? Isn't every "plug and play" kit just plug in and play? NO! Current market options require fabricating mounting brackets or using large amounts of zip ties (we are looking at you guy!) to secure the ECU and the patch harness in the engine bay.
Instructions for install? HA! - Don't exist.
Base Map? Typically not provided and usually never close to your setup if they are.
Plug and Play Add-On Options, extra sensors, etc? Definitely not 100% plug and play, install a sensor and go - meaning the installer has to build wiring harnesses, crimp terminals correctly, figure out routing, etc.

THIS ALL CHANGES NOW!

Introducing 100% TRUELY PLUG AND PLAY ECU REPLACEMENT OPTIONS for your EvoX

What does this mean? We are glad you asked!

The basics of any ECU Package are included: Haltech ECU and ECU Wiring Patch Harness
CAN Gateway included: Meaning proper OEM Communication is happening in the car {NO DASH LIGHTS,100% FUNCTION}
ECU Mounting Solution - 100% Bolt-in, installed in minutes using oem locations. No Drilling, No Zipties, etc. All hardware is provided.
Patch Adapter and Gateway Mounting Solutions - 100% Bolt-in, installed in minutes using oem locations. No Drilling, No Zipties, etc. All hardware is provided.
Full Color Laminated Expansion Wiring Sheet - Detailing the layout of the Expansion Option Connector
Full Color Online PDF Install Guide - For not only the complete ECU and Wiring system, but also for ALL upgrades and add-ons offered.
OEM Vehicle Base Map Provided Standard - Fully tuned OEM Vehicle base map, ready for your tuner to make setup adjustments for your vehicle. Launch Control, Rolling Boost, Flat Foot Shifting, Cruise Control and more are already enabled and ready to go!
Plug and Play Add-On Sensors and ECU Control Harnesses - Over 10 different plug and play sensor options to add to your tuning and logging package along with external plug and play control for things like 2nd fuel pumps, nitrous, etc. These can be purchased initially with the base package or added in later at any time!
Optional Base Map Support - Want to install and start immediately? We can setup a base map for your modifications from the start!

The Bottom Line:

The average lightly mechanically inclined individual with basic hand tools can install our basic Haltech packages with CAN wideband in their garage with jack stands in an average time of 1-2HR. With optional tailored base map, typically you will be able to first start and be ready to start tuning immediately.

Which Haltech ECU Package is right for you? Use the guide below to help make your selection easy.

Elite 1500 ECU Package:

Specs:

Full Control, 100% Operational OEM Functions
Analog Voltage Inputs Qty: 2 - Expansion Connector on Patch Harness (Commonly for Pressure Sensors, IE: Fuel Pressure)
Sync Pulse Inputs Qty: 1 - Expansion Connector on Patch Harness (Flex Fuel Sensor or Pressure Sensors, etc)
*Additional SPI can be utilized if exhaust cam has MIVEC deleted with our cam sensor harness, increasing total SPI to Qty: 2*
Digitally Pulsed Output Qty: 2 - OEM 2nd Boost Control Solenoid (PNP 2nd pump control with our harnesses) + Expansion Connector on Patch Harness. DPO = Low Side Output

Notes:

NO Internal Wideband Control - Requires Haltech CAN Wideband OR analog signal input from existing wideband if installed already (AEM, etc).
Communication with ECU to laptop is via USB cable to ECU at all times for tuning and log retrieval.

Pros:

Affordable Entry Level Package
2 Installation Versions Offered - Engine Bay and Fender Mount
Allows for multiple basic sensor add-ons (Fuel Pressure, Oil Pressure, Flex Fuel, 2nd Fuel Pump Control etc)
Extremely Capable Management System
On-board Data Logging - Up to 40 Channels @ up to 200Hz
Plug and Play with Haltech CAN Products - IC7 Display Dash, PD16PDM, Keypad, Etc

Cons:

Limited additional Inputs and Outputs (I/O Expander is optional for additional if needed)
No Internal Wideband Controller - Requires CAN Wideband or Wiring Existing Wideband
Older ECU Model
USB Cable Required for Tuning
Logging Memory: 2MB

Nexus R3 ECU Package:

Specs:

Full Control, 100% Operational OEM Functions
Analog Voltage Inputs Qty: 3 - Expansion Connector on Patch Harness (Commonly for Pressure Sensors, IE: Fuel Pressure) {+1 Over Elite}
Sync Pulse Inputs Qty: 3 - Expansion Connector on Patch Harness (Flex Fuel Sensor or Pressure Sensors, etc) {+2 Over Elite}
*Additional SPI can be utilized if exhaust cam has MIVEC deleted with our cam sensor harness, increasing total SPI to Qty: 4* {+2 Over Elite}
Digitally Pulsed Output Qty: 1 - OEM 2nd Boost Control Solenoid (PNP 2nd pump control with our harnesses)
Half Bridge Output Qty: 1 - Low or High Side Output
25 AMP High Current Outputs Qty: 4 - Direct High or low side control of Fuel/Water Pumps, Solenoids, Lights, etc No Relays or fuses! Fully mappable, switched or pulsed outputs.
INTERNAL Onboard Wideband Controller - Supports Bosch 4.9 LSU sensor OR NTK sensor. No Gauge or external device required, plug in the sensor and go!
WIFI Connection - Establish initial connection via USB to assign a network name then connect to the ECU via wifi with NO USB CABLE FOR TUNING OR LOGGING. Coming Soon: Haltech Connect - Cellphone App for ECU Access! Read More HERE.
Internal Current Protection on all High Side outputs allows failsafes and monitoring of current draw to help diagnose or prevent electrical related failure.

Pros:

Most Recent ECU Offering from Haltech
EVEN MORE INPUTS for multiple basic sensor add-ons (Fuel Pressure, Oil Pressure, Flex Fuel, 2nd Fuel Pump Control etc [I/O Expander is optional for additional if needed])
Onboard Power Distribution Module (PDM) - Supplying 6 8A High Side Outputs and 4 25A High Current High Side Outputs
128MB On-board Data Logging - Up to 500 Channels @ up to 1K Hz!
Extremely Capable Management System
Plug and Play with Haltech CAN Products - IC7 Display Dash, PD16PDM, Keypad, Etc

Cons:

Higher Initial Expense

Most Affordable Elite 1500 Package:

Complete Haltech Elite 1500 Installation Package
Complete Haltech CAN Wideband Installation Kit (Or use your wideband)
Base Map for YOUR Modifications
$3999.98 with CAN Wideband OR $3629.98 with your wideband

Most Common Purchased Elite 1500 Package:

Complete Haltech Elite 1500 Installation Package
Complete Haltech CAN Wideband Installation Kit
Fuel and Oil Pressure Combo Sensor Package
2nd Fuel Pump Control Harness (Hobb Switch Delete)
Base Map for YOUR Modifications
$4568.99

Most Affordable Nexus R3 Package:

Complete Haltech Nexus R3 Installation Package
Wideband Sensor and PNP Harness
Base Map for YOUR Modifications
$4684.99

Most Common Purchased Nexus R3 Package:

Complete Haltech Nexus R3 Installation Package
Wideband Sensor and PNP Harness
Fuel and Oil Pressure Combo Sensor Package
1st and 2nd Pump Direct Control Harness Upgrade - DIRECT Pump Control - NO Relays or Hardwire Kits, Hobb Switches, etc
Base Map for YOUR Modifications
$5474.99 or $5229.99 without pump control harness